Replacement UPVC Door Handles
You can find the ideal handle for your door, whether you are replacing your existing handles or adding additional security. These upvc handles are easy to install and meet the 92mm centers required by multipoint locks.
The backplate's fixing centre as well as the dimensions of the lever/keyhole are the most important measurements. Compare these measurements to your current marks before placing an order.
Lever/Pad
Lever pad door handles are made up of an elongated lever handle on one side and a paddle-shaped handle on the other. These are designed to be used with key wind locks although they can also be adapted to multipoint split spindle door locks (though you will need an additional dual spindle lock case).
After you have picked the correct handle for the doors the available finishes will be shown in the drop-down menu. Not all styles of handles are available in every finish and you should always look over the sizes and technical drawings for the specific product you're looking for to ensure that you get the right size and fit.
It is important to ensure that when you choose a new set of Upvc lever pad handles, they are in line with the PZ (distance from the spindle of the handle to the centre of the hole in the cylinder) of your multipoint door locks. This is because these must be lined up to ensure that doors stay locked, regardless of whether you are viewing them from the inside or from the outside. The handles we offer are designed to work with a variety of standard cylinder locks, however it is advisable to double-check before purchasing.
If you wish to upgrade to dual spindle levers, you'll need to take out the handles you have already installed and take apart the lock case. This will require an extra split cylinder inline. These can be bought separately and we offer the complete technical diagram for you to examine in the images for each product.
It is recommended to loosen the screws that are holding your door handle, and then check the mechanism. You may have to loosen the screws even more in the event that they are not tight. After that, you can remove the spindle and handle and replace it with a new upvc door handle. It is important to ensure that the handle is in the right position before fixing it. You can do this by placing your finger between the frame of the door and the handle to make sure that it's level.
Lever/Lever
The lever handles on doors are used to operate a multi-point lock that uses the Euro cylinder. They are found on many upvc double doors as well as some aluminium and wooden doors. They are available in two varieties, with an interior lever and a paddle on the outside. Sprung - These include an internal spring cassette within the backplate that helps to bring the handle lever into the horizontal position. Non-sprung: These do NOT have a mechanism to spring the handle lever into a horizontal position.
To fix a sagging lever door handle, you will need to find the hole for access to the detent or pin, which is typically a small round or rectangle shape hole or protruding pin that is located on the opposite side of the handle base plate. Once you have located the detent access hole or pin, you can remove it using an screwdriver.
Once the handle is placed horizontally, you can reinstall the screws. Tighten them to ensure that the handle stays fixed to the base plate. Consider applying a threadlocking product to the screw threads in order to increase grip and stop the threads from becoming loose over time.
Drooping lever door handles could be the result of various causes. The most common reason is that the fixings are too tight, causing the lever bearing to pull against the door. It could also be because the levers aren't operated at a straight angle and this is compressing the latch mechanism and preventing it from fully springing back into action.
Another reason is that the sprung lever isn't working properly. This is usually due to the spring not being in the right position within the backplate. To determine whether the handle has returned to horizontal, simply operate it.
If the door handles aren't tight, it is essential to spot the problem quickly, as it could cause excessive wear on the screws, and even to the handle falling off the base plate. You should also tighten any loose screws regularly to stop them from becoming looser.
Lever/Snib
These upvc door handles are also known as handle sets with a 'Snib' and have a snib button at the top of the lever that can be pressed down to lock your door in the event that you don't have an Dummy lock. upvc replacement door handles come with a Fullex 68PZ (that's 68mm between the spindle's center and lever or lock centre) door lock. We also have a range of other door handles with 68PZ from manufacturers such as Ferco and Fab & Fix.
Changing your door handle is a cost-effective option to modernize your home, whether you're replacing existing handles or fitting new ones on doors you've built in your house. There are many styles of door handles made from upvc available that include traditional levers on backplates, straight or curved short latches and knob handles that resemble dummy knobs for multi point locks, that are perfect for French doors.
Lever on backplate handles are often rectangular, but there are also oval or circular versions that are referred to as rose door handles. These kinds of door handles are equipped with an a knob or lever on a backplate which is placed behind the knob or lever and is often referred to as a rosette. However, certain back plates can be detached for concealed fixing.
There's a wide selection of coloured and chrome finishes available for these handles to enhance your door and hardware, including bolts, knobs and hinges. Some handles are equipped with a screws that grub the knob or lever securely to the spindle. Other handles are supplied with bathroom spindles that can be used to control bathroom locks and incorporate a thumbturn turn and release mechanism, ideal to use on doors for bathrooms.
Mortise
The tubular latch is most likely to be the culprit if your uPVC door handle is slammed shut. There could be a variety of things that can cause this, the most common being an unlubricated latch plate on the latch plate. This can be fixed quite quickly by opening the door and spraying lubricant over the handle and lock. It could also be that the latch has slipped away from the backplate. This could be more complicated and would require a professional to fix it.
A multipoint door handle is a great solution to the problem of a door handle that is stuck. These handles are mounted through the faceplate and are operated with a key or thumb turn knob which activates the cam that locks the deadbolt. The handles are available in a variety of sizes that will fit various types of uPVC doors. They also come with a variety of attractive finishes that match the hardware you already have. The handles can be purchased on the internet or through an authorized locksmith in your area. They are simple to install, with clear instructions.
You will need to know your PZ cylinder's size to select the appropriate replacement handle set. This is the distance in millimetres between the inner edge of the door frame and the center of the hole in the handle. You should also be aware of whether your door has hook-style locks or a mortise style lock. Once you have these measurements, the most efficient method to determine the right handles is to use the filter by brand on the website. This will narrow down your options and you can then choose the right size from the list.
A typical handle set includes the handle unit, a pair of different length screws as well as drill guides and installation instructions. Smart versions, like the Igloohome Smart Mortise 2+ include a mortice lock with keypad. These are more sophisticated devices that are suited to professionals or highly skilled DIYers. Some handle sets come with various accessories, including weather strips, which can be used to enhance the appearance of the door.